You have 0 items in your cart.
Products
Sub Categories
Category:
Combo Test Kits
Fluke 117 Digital Multimeter. VoltAlert™ technology for non-contact voltage detection. AutoVolt automatic ac/dc voltage selection. Low input impedance: Helps prevent false readings due to ghost voltage. Large white LED backlight to work in poorly lit areas. True-rms for accurate measurements on non-linear loads. Measures 10 A (20 A overload for 30-seconds). Resistance, continuity, frequency and capacitance. Min/Max/Average to record signal fluctuations. Compact ergonomic design for one-handed operation. CAT III 600 V safety rated. Fluke 323 True-rms Clamp Meter. Rugged. Reliable. Precise. 400 A ac current measurement. 600 V ac and dc voltage measurement. True-rms ac voltage and current for accurate measurements on non-linear signals. Resistance measurement up to 40 kΩ with continuity detection. Slim, ergonomic design. CAT IV 300V/CAT III 600 V safety rating.
Category:
Combo Test Kits
The Fluke 179/61 Multimeter and Infrared Thermometer Combo Kit was created for industrial, HVAC, and facility maintenance. Rugged true-rms multimeter with a built-in thermometer to troubleshoot electrical and electromechanical problems plus a laser guided, non-contact infrared thermometer for measuring rotating or energized equipment, packed in a durable carrying case.
Category:
Combo Test Kits
Fluke 179 True-rms Digital Multimeter w/ Temperature (More Info >>) True-rms ac voltage and current measurement for accurate readings on all waveforms Frequency, capacitance and resistance capabilities Min/Max/Average records irregular activity Backlight to illuminate the screen in dark workspaces Measures temperature in °C and °F IEC 1010 CAT IV 600 V, CAT III 1000 V safety ratings Limited lifetime warranty Auto and manual hold for later reference Easy-access battery door to change the battery without breaking the calibration seal Overmolded case features integrated probe holders Fluke 1AC-A1-II Non-Contact Voltage Tester (More Info >>) Fits in a shirt pocket for convenience Detects 90 to 1000 VAC All outer surfaces are non-conductive for safety Detects voltage without metallic contact Quickly locates the hot, neutral and ground terminals in any receptacle. (1AC only) Fluke TL224 SureGrip Silicone Test Leads(More Info >>) 59" (1.5 m) silicone-insulated wire resists heat and cold Reinforced strain relief 1000 V CAT III, 600 V CAT IV, 10 A Fluke TP220 SureGrip Industrial...
Category:
Combo Test Kits
Fluke 179 True-rms Digital Multimeter w/ Temperature ( More Info >>) True-rms ac voltage and current measurement for accurate readings on all waveforms Frequency, capacitance and resistance capabilities Min/Max/Average records irregular activity Backlight to illuminate the screen in dark workspaces Measures temperature in °C and °F IEC 1010 CAT IV 600 V, CAT III 1000 V safety ratings Limited lifetime warranty Auto and manual hold for later reference Easy-access battery door to change the battery without breaking the calibration seal Overmolded case features integrated probe holders Fluke TP220 SureGrip Industrial Test Probes (More Info >>) One pair (red, black) of Industrial test probes Sharp, 12 mm stainless steel tip provides reliable contact Flexible finger barrier improves grip Recommended for use with TL222 and TL224 test leads CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed Fluke TL224 SureGrip Silicone Test Leads (More Info >>) 59" (1.5 m) silicone-insulated wire resists heat and cold Reinforced strain relief 1000 V CAT III, 600 V CAT IV, 10 A Fluke AC220...
Category:
Combo Test Kits
Fluke has bundled the Fluke 179 Multimeter & ToolPak Magnetic Meter hanging Strap Kit so they can be ordered with a single part number at a lower price than purchasing the items separately. Now you can get more out of your Fluke 179 Digital Multimeter with the ToolPak Magnetic Meter Hanging Kit.
Category:
Combo Test Kits
Save when you buy the Fluke 287 Logging Multimeter with TrendCapture and FlukeView® Forms software together! The FlukeView Forms Combination Kit comes standard with: - Fluke-287 True-RMS Electronics Logging Multimeter with TrendCapture - FlukeView Forms Software and cable - 80BK-A thermocouple Probe - CAT III 1000 V 10 A Modular test leads (red, black) - CAT III 1000 V 10 A Modular test probes (red, black) - CAT II 300 V 5 A Alligator Clips (red, black) - Soft case for meter protection and accessory storage - And a Limited lifetime warranty Made by Fluke in the USA
Category:
Combo Test Kits
Save when you buy the Fluke 289 Logging Multimeter with TrendCapture and FlukeView® Forms software together! The FlukeView Forms Combination Kit comes standard with: Fluke-289 True-RMS Industrial Logging Multimeter with TrendCapture FlukeView Forms Software and cable 80BK-A Temperature probe TL 71 Silicon Test Lead Set AC72 Alligator Clips TPAK Magnetic Meter Hanger for hands-free operation Soft case for meter protection and accessory storage
Category:
Combo Test Kits
Kit Includes: Fluke-289V Advanced data logging Multimeter Trendcapture:Record, graph and review measurements in the field Large 50,000 count, ¼ VGA display with white backlight. Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment LoZ Volts. Low impedance voltage function prevents false readings due to “ghost voltage 50 ohm range – useful for measuring and comparing differences in motor winding resistance Fluke-i400 AC 400A Current Clamp Companion to your DMM to measure up to 400 A AC 1mA/Amp output guarantees easy reading on you meter Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating Specially designed to offer maximum utility in a very compact shape TL71 Silicone Test Leads AC72 Alligator Clips Limited Lifetime warranty on Fluke-289 and 1-year warranty on accessories