You have 0 items in your cart.
Products
Sub Categories
With its bright, very large, AMOLED display the Cygnus DIVE is simple to operate, providing accurate and reliable thickness measurements, underwater. Depth rated to 300 metres. Available with data logging, topside, HelmetView™ and twin crystal probe options. MSI™ Measurement Stability Indicator - this is a feature exclusive to the Cygnus. When using the DIVE Gauge in Single Echo mode, MSI™ confirms when a reading is stable by turning the thickness measurement numbers from red to yellow.
*Color OLED 320x240 Pixels Display *Live Simultaneous Color A-Scan and Thickness Display *Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes *Time-based B-Scan Display *Echo-Echo Mode,Thru Paint & Coatings
Color 320x240 Pixels Display A-Scan Snapshot Echo-Echo Mode(Thru Paint & Coatings) Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions
1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature applications. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4. Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6. Battery information indicates the rest capacity of the battery. 7. Auto sleep and auto power off function to conserve battery life. 8. Optional software to process the memory data on the PC. 9. Optional thermal mini-printer to print the measured data via RS232 port. 10. Adjust gain function ,can easy to test the cast iron material.
Introduction:Name: Probe for Ultrasonic Thickness GaugeModel: PT-08 (Lemo 00 connector)Frequency: 5MHzDiameter of the contact proportion: 8mmMeasuring Range: 0.8mm-300.0mmAvaliable Contact Temperature: ﹣10ºC-60ºCApplicaiton: use for all Ultrasonic thickness gauge
The TIM001is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces.
Category:
CROSS HATCH CUTTER
Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares
Category:
Power clamps
The clamp power analyser is a very economical solution for the analysis of single phase or balanced 3 phase systems with voltages to 600VAC and current to 2000 amps. The product uses the same SD card logging. Readings are logged from every 2 second to 7200 seconds as instantaneous values. It also captures 3 types of transient events with programmable threshold. The display is graphical dot matrix and has many graphic formats including waveform on voltage and current - phasor diagram and others. Measures ACV, ACA, KW, KVA, KVAR, PF Measures KWH, KVAH, KVARH, PFH Frequency, harmonics to 50th Type K thermocouple input 0.1 resolution to 199.9C then 1C to 1200C SD card logging Cables to 57mm 10amps to 2000amps autorange Record graphic displays to memory as .bmp files